传感器测试温湿度环境箱Sensor Environmental Test Chamber
-
1/人使用者
-
10/次机时次数
-
21/小时总时长
-
0/次送样次数
-
7/人收藏者
-
收费标准
机时80元/小时 -
设备型号
Hochi-YW2203 -
当前状态
-
管理员
冯永明 Yongming FENG,张婷 Ting ZHANG 020-88338604 -
放置地点
E3-129
- 仪器信息
- 预约资源
- 附件下载
- 公告
- 同类仪器
名称
传感器测试温湿度环境箱Sensor Environmental Test Chamber
资产编号
0210000648
型号
Hochi-YW2203
规格
产地
厂家
所属品牌
浙江合治
出产日期
购买日期
2022-03-01
所属单位
可持续大气环境中央实验室 Sustainable Atmospheric Environment Research Facility
使用性质
科研
所属分类
资产负责人
--
联系电话
020-88338604
联系邮箱
tingzhang@hkust-gz.edu.cn
放置地点
E3-129
- 主要规格&技术指标
- 主要功能及特色
- 设备使用相关说明
主要规格&技术指标
1、容积:1.4*1.4*1.5m=3m³，箱体内侧采用优质1.0mm SUS304L不锈钢板，外侧采用1.0mm冷轧钢板喷塑，保温材料采用硬质聚氨酯泡沫和超细玻璃纤维棉，厚度100mm；
2、温湿度要求:温度范围:-10-+50±1℃；
3、湿度范围A:30-90±2%R.H(温度20℃~50℃),，温度均匀度:<±2℃，湿度均匀度:≤3%R.H，温度偏差:≤±2.0℃，湿度偏差:≤±3%；
4、温升速率:降温速率:0.7~1.2℃/min，升温速率:1.0~3.0℃/min；
5、采样口:为不锈钢对锁螺母连接，不用时可封闭，手套口:为内径为12cm 1个，材质为铝合金或聚四氟制作方便拆卸(根据需求设定)
6、测试舱具有排风系统和循环净化系统，电动阀门控制排风和循环净化，测试舱排放系统打开时，内舱中的污染物不得进入外泄
7、颗粒物粒径0.3um以上粒子数不高于1000个儿，甲醛本底值不高于0.05mg/m³、TVOC本底值不高于0.3 mg/m³，甲苯本底值不高于0.1mg/m³
uniformity is ≤3% R.H, the temperature deviation is ≤±2.0℃, and the humidity deviation is ≤±3%.
4.Temperature rise rate and cooling rate: The cooling rate is 0.7 - 1.2℃/min, and the heating rate is 1.0 - 3.0℃/min.
5.Sampling port: Connected by stainless steel lock nuts, and can be sealed when not in use. Glove port: There is one glove port with an inner diameter of 12cm, made of aluminum alloy or polytetrafluoroethylene, which is easy to disassemble (set according to requirements).
6.The test chamber is equipped with an exhaust system and a circulating purification system. The exhaust and circulating purification are controlled by electric valves. When the emission system of the test chamber is opened, the pollutants in the inner chamber shall not leak out.
7.The number of particles with a particle size of more than 0.3um is not higher than 1000 pieces per unit volume. The background value of formaldehyde is not higher than 0.05mg/m³, the background value of TVOC is not higher than 0.3mg/m³, and the background value of toluene is not higher than 0.1mg/m³.
2、温湿度要求:温度范围:-10-+50±1℃；
3、湿度范围A:30-90±2%R.H(温度20℃~50℃),，温度均匀度:<±2℃，湿度均匀度:≤3%R.H，温度偏差:≤±2.0℃，湿度偏差:≤±3%；
4、温升速率:降温速率:0.7~1.2℃/min，升温速率:1.0~3.0℃/min；
5、采样口:为不锈钢对锁螺母连接，不用时可封闭，手套口:为内径为12cm 1个，材质为铝合金或聚四氟制作方便拆卸(根据需求设定)
6、测试舱具有排风系统和循环净化系统，电动阀门控制排风和循环净化，测试舱排放系统打开时，内舱中的污染物不得进入外泄
7、颗粒物粒径0.3um以上粒子数不高于1000个儿，甲醛本底值不高于0.05mg/m³、TVOC本底值不高于0.3 mg/m³，甲苯本底值不高于0.1mg/m³
uniformity is ≤3% R.H, the temperature deviation is ≤±2.0℃, and the humidity deviation is ≤±3%.
4.Temperature rise rate and cooling rate: The cooling rate is 0.7 - 1.2℃/min, and the heating rate is 1.0 - 3.0℃/min.
5.Sampling port: Connected by stainless steel lock nuts, and can be sealed when not in use. Glove port: There is one glove port with an inner diameter of 12cm, made of aluminum alloy or polytetrafluoroethylene, which is easy to disassemble (set according to requirements).
6.The test chamber is equipped with an exhaust system and a circulating purification system. The exhaust and circulating purification are controlled by electric valves. When the emission system of the test chamber is opened, the pollutants in the inner chamber shall not leak out.
7.The number of particles with a particle size of more than 0.3um is not higher than 1000 pieces per unit volume. The background value of formaldehyde is not higher than 0.05mg/m³, the background value of TVOC is not higher than 0.3mg/m³, and the background value of toluene is not higher than 0.1mg/m³.
主要功能及特色
1、能精准控制舱内的温度、湿度、空气流量等环境参数；
2、可用于检测各种建材、家具、装饰材料等释放的甲醛、VOCs 等有害物质。通过在舱内放置样品，经过一段时间后，采集舱内空气样本进行分析，确定样品释放的有害物质浓度，以评估材料的环保性能；
3、将空气净化器等净化设备放入舱内，通过在舱内释放一定量的污染物，然后开启净化设备，检测在一定时间内净化设备对污染物的去除效果，从而对净化设备的性能进行评估。
1、It can accurately control environmental parameters such as temperature, humidity, and air flow rate inside the chamber.
2、It can be used to detect harmful substances such as formaldehyde and VOCs (Volatile Organic Compounds) released by various building materials, furniture, decorative materials, etc. By placing samples inside the chamber, after a certain period of time, air samples inside the chamber are collected for analysis to determine the concentration of harmful substances released by the samples, so as to evaluate the environmental protection performance of the materials.
3、Place purification equipment such as air purifiers inside the chamber. Release a certain amount of pollutants inside the chamber, then turn on the purification equipment, and detect the removal effect of the purification equipment on pollutants within a certain period of time, thus evaluating the performance of the purification equipment.
2、可用于检测各种建材、家具、装饰材料等释放的甲醛、VOCs 等有害物质。通过在舱内放置样品，经过一段时间后，采集舱内空气样本进行分析，确定样品释放的有害物质浓度，以评估材料的环保性能；
3、将空气净化器等净化设备放入舱内，通过在舱内释放一定量的污染物，然后开启净化设备，检测在一定时间内净化设备对污染物的去除效果，从而对净化设备的性能进行评估。
1、It can accurately control environmental parameters such as temperature, humidity, and air flow rate inside the chamber.
2、It can be used to detect harmful substances such as formaldehyde and VOCs (Volatile Organic Compounds) released by various building materials, furniture, decorative materials, etc. By placing samples inside the chamber, after a certain period of time, air samples inside the chamber are collected for analysis to determine the concentration of harmful substances released by the samples, so as to evaluate the environmental protection performance of the materials.
3、Place purification equipment such as air purifiers inside the chamber. Release a certain amount of pollutants inside the chamber, then turn on the purification equipment, and detect the removal effect of the purification equipment on pollutants within a certain period of time, thus evaluating the performance of the purification equipment.
设备使用相关说明
注意事项：
1.设备严禁用于易燃易爆、有毒、强腐蚀性物品的试验；
2.本试验箱无防爆装置，不得放入易燃易爆物品干燥；
3.绝对禁止设定温度超过本设备规定温度。
1.设备严禁用于易燃易爆、有毒、强腐蚀性物品的试验；
2.本试验箱无防爆装置，不得放入易燃易爆物品干燥；
3.绝对禁止设定温度超过本设备规定温度。
预约资源
附件下载
公告
同类仪器
